E27 Bulb Adaptor - 4 into 1
- Product Code: MD02524
- Availability: In Stock
-
NZD
$
9.99
- Ex Tax: $8.69
E27 Bulb Adaptor - 4 into 1
This adaptor allows 4 E27 bulbs installed in one single E27 socket at the same time
This cost effective adapter greatly increases light output by converting a single household bulb outlet on photo lighting reflectors to accept 4 spiral fluorescent bulbs.
Depending on the bulbs used, the light output will be equal to a maximum of 240 watts of photo flood illumination, but with much less heat and longer bulb life.
Designed to handle fluorescent bulbs totaling up to 240watts.
NOTE: Light power should be lower than 60W for each socket, meaning the total power should not exceed 240W.
Features:
- Standard E27 base type (same as house hold bulbs)
- It allows 4 E27 bulbs installed in one single E27 socket at the same time
- It is a 4 in 1 studio E27 lamp socket splitter adapter for studio daylight bulbs
- Package included: 1 x 4 in 1 Studio Light Lamp Socket Splitter Adapter.
- Support power 60W x 4 (240W in total).
- This product is ideal for extra lighting for photography or filming
This item is designed for CFL (Compact Fluorescent Lamp)
Size: 9.8cm x 9.8cm at 11.5cm deep
NOTE:
- These are designed for photography use and must not be left on for extended periods of time.
- Do not over tighten adapter when installing into set up
This cost effective adapter greatly increases light output by converting a single household bulb outlet on photo lighting reflectors to accept 4 spiral fluorescent bulbs.
Depending on the bulbs used, the light output will be equal to a maximum of 240 watts of photo flood illumination, but with much less heat and longer bulb life.
Designed to handle fluorescent bulbs totaling up to 240watts.
NOTE: Light power should be lower than 60W for each socket, meaning the total power should not exceed 240W.
Features:
- Standard E27 base type (same as house hold bulbs)
- It allows 4 E27 bulbs installed in one single E27 socket at the same time
- It is a 4 in 1 studio E27 lamp socket splitter adapter for studio daylight bulbs
- Package included: 1 x 4 in 1 Studio Light Lamp Socket Splitter Adapter.
- Support power 60W x 4 (240W in total).
- This product is ideal for extra lighting for photography or filming
This item is designed for CFL (Compact Fluorescent Lamp)
Size: 9.8cm x 9.8cm at 11.5cm deep
NOTE:
- These are designed for photography use and must not be left on for extended periods of time.
- Do not over tighten adapter when installing into set up
About
Twitter
Facebook